Fire Fighting Gloves

This product meets the GA7-2004 "Fire Gloves" standard.

Combined structure: composed of outer layer, waterproof layer, heat insulation layer and lining.

It has flame retardancy, overall thermal protection, heat resistance, mechanical properties, and barrier properties.

Outer layer of gloves:

(1) Continuous burning time in warp direction: 0s; continuous burning time in zonal direction: 0s;

(2) Warp direction smoldering time: 0s; zonal smoldering time: 0s;

(3) Damaged length in warp direction: 55mm; Damaged length in weft direction: 64mm.

Insulation layer of gloves:

(1) Continuous burning time in warp direction: 0s; continuous burning time in zonal direction: 0s;

(2) Warp direction smoldering time: 0s; zonal smoldering time: 0s;

(3) Damaged length in warp direction: 46mm; Damaged length in weft direction: 44mm.

Overall thermal protection performance of gloves: 28.9cal/cm².

Heat resistance of gloves: shrinkage rate of 1.5%; heat resistance of lining: shrinkage rate of 1.0%.

Wear resistance of palm and back: >2000.

The palm and back cutting force are more than 15.0N.

Palm tear strength: 88.7N.

Palm piercing force: 57.4N.

Dexterity performance: Pick up steel rods with a diameter of 6.0mm 3 times within 30s.

Grip performance: the pull-to-gravity ratio is 95.0%.

Wearing performance: Wearing time 1.26s.